Skip to main content

Frequently Asked Questions

Can I choose where the glass is located on a Resolute Door?

Yes, if it is within the tolerances of the door i.e. not too close to the edge or too close to another vision panel or lock.

How thick is the glass in the Resolute Glazed Doors?

23mm tempered double glazing (6mm / 11mm air / 6mm).

What are the main components in a Resolute Door?

Fibreglass, Fibreglass Pultrusion, LVL, Rigid Polyurethane Foam, Composite Resin.

My frame is not square - can I still use a Resolute Door?

Yes, Resolute doors can be planed just like a timber door so if your frame is out of square you can take off a small amount from the required edge of the door.

How can you tell which side the lock block is on a Resolute Door?

There should be a sticker indicating the side of the lock block on the bottom of the door. If this is missing for some reason tap along on the door and you will be able to hear the difference and locate the lock block.

How do you drill for a lock and hinges on a Resolute Door?

We recommend you get Parkwood to drill for the lock, if that is not possible you can find instructions here. Hinges can be rebated just like a timber door.

I just bought a Resolute Door. How much can I trim off it?

General rule of thumb is 10mm off every edge can be taken off, but some designs are unable to be trimmed.

What are the standard powder-coat colours for Garrison Aluminium Doors?

Click here to view our standard powder-coat colours, these colours are included in the price of the door, other colours occur an additional charge.

Can I choose the size of glass on an Garrison Aluminium Door?

Yes you can request certain sized vision panels.

Can I have an Garrison Aluminium Door wet sprayed?

Parkwood do not offer wet spraying of aluminium doors, but can supply the product prepped with a white primer coat layer ready for painting by others.

Can I return a door to Parkwood?

Parkwood does not accept returns of doors due to the fact that they are made to order.

Can I buy direct off Parkwood?

Parkwood is the manufacturer so we supply direct to commercial builders, or via resellers like window fabricators and building merchants.  We are unable to supply direct to the general public.  Doors must be ordered using specialist forms and signed off based on shop drawings.  We do not site measure or fit doorsets.

Do Parkwood offer a measure and quote service?

No, we just manufacture the doors.

Do you offer sandwich panels? If so, what thickness is available?

Yes, we offer flat poly core sandwich panels with or without grooves at 22mm, 24mm and 28mm thick.

What is the minimum and maximum door sizes I can have?

The maximum and minimum door size is dependant on the door style you are after, you can also find this information on the individual door products page.  You can also make use of the filters to help you find what you require.

With 40+ dealers nationwide

There’s sure to be help on your doorstep