Description
Sizes Available:
- 1980 x 710mm
- 1980 x 760mm
- 1980 x 810mm
- 1980 x 860mm
The smarter interior door – The answer for all interior wet areas. PU dense foam core provides excellent insulation rating with no rotting, swelling or twisting.
Superior durability for high-traffic areas, water resistance for bathrooms, kitchens and other wet areas, smooth fibreglass skins for a hygienic finish, excellent stability and exceptional impact resistance.
- 35mm thick.
- LVL styles and rails for superior stability.
- PU dense foam core for high insulation and low sound transmission.
- No swelling or breakdown thanks to the fully sealed composite PVC resin edges on 4 sides of door.
- Straight and stable, no bowing due to LVL stiles.
Construction
-
GRP/fibreglass SkinÂ
-
Made from sheet moulding compoundÂ
-
Smooth skin doors 1.6-2mm skin thicknessÂ
-
LVL supporterÂ
-
Each door is constructed using an internal structure supporter manufactured from LVL (Laminated Veneer Lumber)Â
-
Stile of both sidesÂ
-
The stiles are one (1) piece of composite PVC stile and one (1) piece of LVLÂ
-
Top railÂ
-
The top rail is one (1) piece of composite PVCÂ
-
Bottom RailÂ
-
Bottom rail is one (1) piece of composite PVCÂ
-
Lock Block o Lock block is approximately 350mm long, 75mm wide, on 1 side as marked on doorÂ
-
GlueÂ
-
 The glue used to bond the fiberglass door skins to the frames is Urethane Adhesive ResinÂ
-
CoreÂ
-
PU foamÂ
Sound transmission/insulation: STC 25 / Rw 30 / Rw + Ctr 25 (modelled based on standard construction and materials) Impact resistance: Test results of a door of similar materials and construction:Â
Design pressure: ±50.0psfÂ
Water penetration resistance 7.5psfÂ
The FTS Duramax door can be trimmed 10mm in overall height and width (must be even amount off both sides).
